How to solve the problem of anti-corrosion and heat insulation for living containers?

住人集裝箱在很多城市都是年輕人熱衷于選擇的一個居住場所，畢竟內部空間自由發揮，還便宜。但是冬暖夏涼、風霜雨雪的敲打，總會造成一定的困擾，即便是空調或者降溫器等等，也無法阻止夏季集裝箱內部的高溫作祟，還有長期使用下來的把腐蝕情況。那么對于出租的集裝箱，廠家一般會采取什么辦法對其機型防腐蝕。隔熱工作呢？下面一起來看下吧。

In many cities, living container is a place that young people are keen to choose. After all, the internal space is free and the price is cheap. However, the impact of warm winter and cool summer, wind, frost, rain and snow will always cause certain problems. Even the air conditioner or cooler can not prevent the high temperature inside the container in summer, and the corrosion of the container after long-term use. So for rental containers, manufacturers will generally take what measures to its model corrosion. What about insulation? Let's take a look.

1、熱浸鋅

1. Hot dip galvanizing

（1）熱浸鋅生產工業化程度高，耐久年限長，其質量穩定。所以，大量的用于受大氣腐蝕較嚴重、且不易維修的室外鋼結構中。

(1) Hot dip galvanizing has high industrialization, long durability and stable quality. Therefore, a large number of them are used in outdoor steel structures which are seriously corroded by the atmosphere and difficult to maintain.

（2）近年來，大量出現的輕鋼結構體系中的壓型鋼板等，也較多采用熱浸鋅防腐蝕。熱浸鋅的工序是酸洗除銹、然后是清洗。

(2) In recent years, a large number of light steel structure system, such as profiled steel sheet, also use hot-dip galvanizing corrosion protection. Hot dip galvanizing process is pickling rust, and then cleaning.

（2）對于鋼結構設計者，應該避免設計出具有相貼合面的構件。以免貼合面的縫隙中，酸洗不干凈或酸液洗不凈，造成鍍鋅表面流黃水的現象。熱浸鋅是在高溫下進行的。

(2) For the steel structure designer, it should be avoided to design the components with the interface. So as to avoid the phenomenon of yellow water flowing on the galvanized surface due to unclean pickling or acid washing in the joint surface. Hot dip galvanizing is carried out at high temperature.
                                

2、涂層法

2. Coating method

（1）涂層依賴于除銹，常用的氟碳涂料，防腐年限甚長達50年。所以，用于室內鋼結構、或相對易于維護的室外鋼結構較多。它一次成本低，但用于戶外時維護成本較高。涂層法的施工的步是除銹。所以，要求高的涂層一般多用噴砂噴丸除銹，露出金屬的光澤，除去所有的銹跡和油污。

(1) Coating depends on derusting, commonly used fluorocarbon coating, anti-corrosion life even as long as 50 years. Therefore, there are many indoor steel structures or outdoor steel structures which are relatively easy to maintain. It has low cost at one time, but high maintenance cost when used outdoors. The first step of coating method is to remove rust. Therefore, the coating with high requirements is usually rust removed by sand blasting to expose the luster of metal and remove all rust and oil stains.

（2）現場施工的涂層可用手工除銹。涂層的選擇要考慮周圍的環境，不同的涂層對不同的腐蝕條件、有不同的耐受性。涂層的施工要有適當?shù)臏囟?、濕度，涂層的施工環境粉塵要少，構件表面不能有結露。涂裝后4小時之內不得淋雨，涂層一般做4、5遍。在海邊或海上或是在有強烈腐蝕性的大氣中，干漆膜總厚度可加厚。

(2) The coating applied on site can be removed by hand. The selection of coating should consider the surrounding environment. Different coatings have different resistance to different corrosion conditions. The coating construction should have proper temperature and humidity, the dust in the coating construction environment should be less, and there should be no condensation on the surface of components. No rain is allowed within 4 hours after coating, and the coating is generally made for 4 or 5 times. The total thickness of dry paint film can be increased by the sea or at sea or in the atmosphere with strong corrosivity.