Living in container houses can provide temporary accommodation for migrant workers, and also provide accommodation environment for people outdoors. The sizes and shapes are different. Users can choose the type of products according to the actual needs. In order to be convenient to use, what problems should we pay attention to when living in container room?

住人集裝箱房需要注意的問題：

Attention should be paid to the following problems in container housing:

產品體積大小

Product size

客戶根據自己產品的大小對長寬高進行測量，對住人集裝箱房的尺寸要求宜大不宜小。測量產品體積時測量單位一般誤差越小越好，尺寸越大所耗費的成本可能會更高。

Customers measure the length, width and height according to the size of their products, and the size of the container room should be large rather than small. The smaller the measurement unit error is, the better. The larger the size is, the higher the cost may be.

對箱體的承重要求

Load bearing requirements for box

選擇住人集裝箱房，用戶要對自己的產品的重量進行稱量，這樣才能選擇出合適材質的住人集裝箱房來承受產品的重量。

To choose the living container room, users should first weigh the weight of their products, so that they can choose the living container room with suitable materials to bear the weight of the products.
                        

設備是否需要及時散熱

Does the equipment need to be cooled in time

設備是否需要及時散熱這就涉及對箱體底板要求，箱體如何排風散熱等方面。如果需要排風散熱就需要焊接或安裝百葉窗及排風扇，具體位置根據設備在箱內的擺放位置而定。

Whether the equipment needs heat dissipation in time is related to the requirements of the box bottom plate, how to exhaust and heat dissipation of the box, etc. If you need to exhaust heat, you need to weld or install louvers and exhaust fans. The specific location depends on the location of the equipment in the box.

是否需要裝修

Do you need decoration

住人集裝箱房因為可能涉及到箱體會有工作人員進出，所以大部分客戶會提出對箱體進行簡單裝修。箱體后端開集裝箱后門方便設備進出，正面安裝防盜門。

Living in the container room, most customers will propose simple decoration for the box because it may involve the access of the staff. The back door of the container is opened at the rear end of the box to facilitate the access of equipment, and the front side is equipped with anti-theft door.

是否需要裝線

Is it necessary to install the line

一般來講裝線并不是必要，但是客戶需要根據產品特性考慮是否需要裝線。一般箱體會將進線和出線口設計在箱體下方，并且線口處還會考慮防水問題。

Generally speaking, assembly line is not necessary, but customers need to consider whether it is necessary according to product characteristics. Generally, the inlet and outlet of the box are designed under the box, and the waterproof problem will be considered at the outlet.

用戶可以根據自己的需求選擇服務，可以根據住人集裝箱房體積大小、是否需要及時散熱、裝修以及裝線等問題，如果您不了解如何住人集裝箱房，可以參考文中講述的內容或者和住人集裝箱房廠家聯系，我們會為您提供服務。

Users can choose services according to their own needs, according to the size of the living container room, whether it needs timely cooling, decoration and assembly line. If you don't know how to live in the container room, you can refer to the content described in the article or contact the living container room manufacturer, and we will provide services for you.